Princess I Cast Iron Radiator (460mm)
The Princess I features a traditional school radiator design with smooth lines and soft curves. This Radiator is 460mm tall, 126mm deep and built to any length. Finished in a wide range of colours or polished by hand to a high sheen. Delivered fully assembled and ready to install up to 1.1m or up to 2m with partial home assembly. Use Windsor thermostatic valves for energy efficient operation and a classic aesthetic. Covered by our no quibble ten year guarantee.
Our bespoke radiators are custom built section by section to give the correct heat output. You will be required to select the number of sections for the length and heat output that you need.
This radiator also requires two wall stays, which are a necessary safety feature – they secure the radiator to the wall and prevent it from falling over if knocked.
Leg section height: 455mm
Middle section height: 395mm
Section length: 75mm
Radiator depth: 128mm
Bottom inlet to floor: 105mm
Top inlet to floor: 405mm
Pipe centres to skirting board: 64mm
Heat output per section: 48 Watts / 164 BTUs
Empty weight leg section: 5.40kg
Empty weight middle section: 5.00kg
Our radiators are hand assembled so we can’t give 100% accurate pipe centre measurements before they’ve been made. Let us know when placing an order if your plumber is planning to lay pipes before it arrives and we’ll send you the exact measurements usually within 72 hours of an order being placed. Your plumber can then drill holes in the floor and lay position the pipework with absolute confidence.
We supply all our radiators with 1/2” BSP connections to pair with all of our valves and most valves available elsewhere too. We can provide any valve configuration but as standard we’ll always fit them bottom opposite ends (BOE).
Radiator Finish Options
Below we have listed our recommended finishes for this particular radiator model.
You can view our entire range of finishes available by clicking here.
Mid Grey Sparkle
Metallic Grey Bronze