Rococo I Cast Iron Radiator (560mm)

Rococo I Cast Iron Radiator (560mm)

The Rococo I is an ornate radiator with a scrolled top. With intricate Rococo motifs and a depth of just 140mm, Rococo I is a slimmer, space-saving alternative to the Rococo II and Rooco III ranges. 560mm tall, 140mm deep. Available in three heights and built to order at any length up to 2m. Suits Victorian properties or older.

We love this model finished in Satin Polish and paired with Chatsworth valves in Black Nickel for a statement piece, in Natural Brass with Windsor valves for a more classic appearance or in Bronze Verdigris for a real talking point.

Sections
Our bespoke radiators are custom built section by section to give the correct heat output. You will be required to select the number of sections for the length and heat output that you need.

Wall Stays
This radiator also requires two wall stays, which are a necessary safety feature – they secure the radiator to the wall and prevent it from falling over if knocked.

Finishes Available
Choose from our unrivalled Bare Metal finishes for an exquisite look. Our signature range is hard-wearing and carefully selected for cast iron radiators, or match your interior with genuine Farrow & Ball. Browse the finishes available here.

Measurements
Our radiators are hand assembled so we can’t give 100% accurate pipe centre measurements before they’ve been made. Let us know when placing an order if your plumber is planning to lay pipes before it arrives and we’ll send you the exact measurements usually within 72 hours of an order being placed. Your plumber can then drill holes in the floor and lay position the pipework with absolute confidence.

Leg section height: 560mm
Middle section height: 500mm
Section length: 75mm
Radiator depth: 140mm
Bottom inlet to floor: 110mm
Top inlet to floor: 510mm
Pipe centres to skirting board: 72mm
Empty weight leg section: 7.8kg
Empty weight middle section: 7.4kg
Internal volume section: 0.8 l

Installation
We supply all our radiators with 1/2” BSP connections to pair with all of our valves and most valves available elsewhere too. We can provide any valve configuration but as standard we’ll always fit them bottom opposite ends (BOE).